3DXTech STAT™ ESD-PLA | 3D Printing Filament | 1.75 mm (0.75Kg) | Black

3DXSTAT ESD PLA

3DXSTAT ESD PLA is an advanced ESD-Safe compound designed for use in critical applications which require electrostatic discharge (ESD) protection. Made using cutting-edge multi-wall carbon nanotube technology, state of the art compounding technology, and precision extrusion processes. Target surface resistance 107 to 109 Ohm.

Benefits of PLA Include:

Ideal for printing without a heated bed, no enclosure required

Low shrinkage, warping, and easy printability, PLA prints on practically all desktop 3D printers

Very low odor, perfect for printing in home or office environments

Gorgeous surface quality to make printed parts look beautiful

Made from plants makes PLA a renewable biopolymer

Benefits of 3DXSTAT™ Include:

Consistent surface resistivity

Improved retention of impact & elongation

Low particulate contamination

Minimal contribution to outgassing and ionic contamination

Typical ESD PLA Applications Include:

Semi-con: HDD Components, Wafer Handling, Jigs, Casings, & Connectors

Industrial: Conveying, Metering, and Sensing Applications

Target Conductivity for 3DXSTAT ESD PLA:

10^7 to 10^9 ohm surface resistivity on 3DP sample using concentric ring test method.

Note: Internal studies have indicated that increased extruder temperatures can achieve higher levels of conductivity. Likewise, lower extruder temperatures have resulted in lower levels of conductivity. Each printer is set-up differently as well as varied part geometry. Therefore, expect some trial time to understand how ESD PLA filament works in your specific printer / application.

Surface Conductivity as a Function of Extruder Temperature:

The surface resistance of the printed ESD PLA part will vary depending on the printer’s extruder temperature. For example, if your testing indicates the part is too insulative, then increasing the extruder temperature will result in improved conductivity. Therefore, the surface resistance can be ‘dialed-in’ by adjusting the extruder temperature up or down depending on the reading you receive on your part.

Recommended Print Settings:

Extruder: 210-240°C

Bed Temp: 23-60°C

Bed Prep: Magigoo Bed Prep Adhesive and 3DXTECH Polyimide Tape work

Heated Chamber: Not required

Other: Increasing your extrusion multiplier up to 1.15 or even 1.2 and varying your fan speed between 50-100% may be necessary.

Supports: Water soluble AquaTek™ X1 USM works great for complex parts.

Drying Instructions: 65°C for 4 hours.