PrimaSelect Luvocom 3F PEKK 50082 | 1.75mm (0.5Kg) | Natural

Buy PEKK 3D printer filament for highest performance applications

Polyether Ketone Ketone (PEKK) is a semi-crystaline thermoplastic. It belongs to the Polyaryletherketone family. With high heat & chemical resistance and its ability to withstand high mechanical loads it is perfect for manufacturing of demanding end use parts. Furthermore, it is inherent flame retardant and has unique tribological properties.

Material properties PrimaSELECT™ Luvocom 3F 9581 PEKK:

Specially optimized for industrial 3D printing

Isotropic shrinkage characteristics

Nonflammable (UL94 V-0)

Continuous service temperature 255°C

Service temperature 300°C (during lifetime max. 200h)

Highly chemically resistant

Low warping PEKK filament

PEKK is easier to process than PEEK filament

PEKK filament has an adjustable crystallization rate that allows users of FFF or FDM 3D printers to take advantage of both the extreme performance of PEEK and the easier processing of amorphous materials. PEKK filament is easier to process than traditional PEEK filament and has a better layer adhesion. At the same time, it offers similar strength and resistance material properties and better dimensional stability. PEKK has a higher glass transition temperature than PEEK of 15ᵒC.

LUVOCOM® 3F PEKK 50082 material properties:

Density 1.27 g/cm³

Tensile Strength 90 MPa

Elongation at maximum force 5%

Modulus of elasticity 3 GPa

Flexural strength 150 MPa

Flexural elongation at max. force 6%

Flexural modulus 2,5 GPa

3D print PEKK with little warping

LUVOCOM® 3F PEKK 50082 is designed to outperform standard PEKK materials on the market. It has improved flow characteristics that enhance processing and layer adhesion. This unique modified pure PEKK offers dimensional stability and can be processed in non-heated build chambers, resulting in semi-crystalline parts with little warping.

3D Print Settings:

Print Temperature: 340°C (320-360°C

Bed Temperature: 110-140°C

Print Speed: 20-50 mm/s

Drying Instruction: 4 hours, 110°C