D1000 is upgraded from the model F1000. With a build volume of over 1000 x 1000 x 1000mm, it is the perfect machine for creating large and full size parts, prototype, tools, molds, jigs & fixtures in-house. Within days you can have a fully functional high quality prototype. CreatBot big rolls filament of PLA, ABS, ASA, PA-CF, etc suit well for your big models without worrying frequent replacement of filament. All its features manufactured to the highest standards. Every time, every parts, no mistake.
EU Standard Shipping, 3-5 days, from 3€
With the CreatBot D1000 you can now print large and complex models. The D1000 is a large format industrial printer with dual extruders and heated build chamber.
Features:
The D1000 is an upgrade of the F1000 model. With a build volume of over 1000 x 1000 x 1000 x 1000 mm, it is the perfect machine for creating large, full-size parts, prototypes, tooling, molds, jigs and fixtures in-house. In just a few days you can have a fully functional, high quality prototype. CreatBot's large filament rolls of PLA, ABS, ASA, PA-CF, etc are well suited for your large models without worrying about frequent filament replacement. All of its features manufactured to the highest standards. Every time, every part, no mistakes.
Faurecia is a global supplier of advanced automotive systems engineering and equipment. They use the CreatBot model D1000 3D printer to design and develop automotive seat molds, and are widely used in Audi, VW, NISSAN and GM engines. The molds in the video are their typical 3D printing product produced with the D1000 3D printer. The bowl and lid are required to withstand 100MPa, we choose nylon-carbon fiber materials for production with 50% filler. finally the performance of the prints are excllet and passed their strict tests!
The CreatBot D1000 has been created to make industrial 3D printing of large-scale objects and prototypes as easy as possible. It is equipped with a lot of advanced technology for ultra-large and impressive prints. It will be your best choice without a doubt, if you are looking for a large-scale industrial 3D printer for prototypes and engineering grade materials.
If you are tired of the brittleness of PLA and the deformation of ABS, try our revolutionary UltraPA-CF material. Print your large size model with a large size nozzle, in a few days, you will get a large size model with high strength 80MPa and temperature resistance 150°C. The best choice for your verification prototype.
D1000 is embedded with new intelligent self-lifting dual extruder kit hotend hotend temperature up to 420 ℃, The hotend can be replaced to different sizes one fastly. it is able to print not only huge PLA+water soluble PVAfor prototype materials with the fastest speed, but also ABS, PC, nylon, carbon fiber, flexible and more high performancematerial for direct application. The dual-hotend is easy to maintain and affordable to replace.
The printer will automatically memorize the current position and save the print data. Lower the platform and remove the filament when it suddenly shuts down. It will continue printing from the last stopped point after power on. No trace The printer will prevent invalid printing by stopping printing and warning when the filament runs out.
When reaching a length of more than 1000mm, the small rails have a large deflection. The precise linear rail structure of the D1000 is very thick and strong. It will not deform or lose accuracy after the print head shock millions of times. With servo motors, punctuality, fast response, no inertia, no delay. closed-loop control of position overcomes the problem of pitch loss. heat and noise are significantly reduced. Provides the printing model with ultra-high performance with high speed.
The 60°C hot chamber ensures the printing quality for high performance materials. The fully enclosed chamber can block all external interferences. Also this frame can reduce noise, at the same time to provide a constant temperature, so that the model will not deform. The filament drying chamber provides chamber temperatures of 45°C and 65°C for drying 2x5kg/roll of filament such as PLA, nylon, PC, ABS and other water-absorbing materials.
Using 100 points through high precision servo probe to save the level of the platform flatness data in the initial, through the intelligent Z-axis of table height compensation in the printing process to achieve fully automatic leveling.
The air filter system can adsorb impurities and gases which are generated by printing special filament such as ABS, Nylon, PC, more safe and environmental protection which is more suitable for home, school, office space.
Camera control technology allows customers to control the printing process in speed,pause,temp.etc with APP remotely, which can achieve the best printing quality with the shortest time without failure. A very useful feature in large models and long printing time.
The CreatBot D1000 has been created to make industrial 3d printing of large-scale objects and prototypes as easy as possible. It is an industrial 3d printer that responds to market demand and is equipped with a new intelligent dual extruder kit, an enclosed climate chamber, automatic leveling system and camera control for large and impressive prints. The chamber control technology allows customers to control the printing process with an APP, enabling the best print quality with the shortest time without failure. With a fast warm-up platform and hot chamber, this high-resolution workhorse for large prints produces incredible results with high-quality materials. CreatBot D1000 sets a new standard in additive manufacturing and expands the material capabilities of large-scale 3d printers, brings the possibility of greatly reducing cost and time for more companies.
CreatBot D1000 will be your best choice without doubt, if you are looking for a large-scale industrial 3d printer for prototyping and engineering grade materials.
The all-steel body not only ensures the stability during printing, but also greatly prolongs the service life. Optimization and cooperation of the overall structure ensure sustainable and efficient operation. The first batch of CreatBot 3d printers with all-steel body have been working for 9 years and more than 30,000 hours.
Detalles técnicos
| Weight | - |
|---|---|
| Package weight | - |
| Touchscreen | Yes |
| Built-in camera | Yes |
| Power consumption (typical) | - |
| Housing material | ABS / aluminum |
| Product type | 3D Printer |
| Print technology | FDM |
| Maximum build size (WxDxH) | - |
| USB port | - |
| Brand | Creatbot |
| Filament thickness supported | 1.75 mm |
| Model | - |
| Nozzle type | - |
| Maximum nozzle temperature | - |
| Open filament system | Yes |
| Extruder type | - |
| Maximum printing plate temperature | - |
| Printing plate material | - |
| Leveling system | - |
| Construction chamber during the process | - |
| Filament deflection sensor | Yes |
| Safety failure due to loss of power supply | Yes |
| SD card | Yes |
| WLAN | - |
| Control in the cloud | - |
| Layer height | - |
| Sistema compatible: | - |
| Contains substances of very high concern in a concentration greater than 0.1% by mass percentage. | No |
| Battery included | No |
| Manufactured mostly in | - |
| Connected object (home automation and smarthome) | Yes |
| Spare parts availability period after purchase of last unit sold (in years) | 5 |
| Number of extruders | 2 |
| Shipping carton | - |
| Maximum printing speed | - |
Grade Comments (0)