Components and Accessories

copy of Bambu Lab A1 Series...
  • New
stock
Hotends

copy of Bambu Lab A1 Series - Hotends Kit

P1-hotend-boq-08-mknt
€37.28
The special design of hotend heating assembly enables easy separation of the thermal and electronic components of the hotend. In addition, the magnetic block installed on the hotend heatsink enables quick and accurate fixation of the hotend to its precise mounting position. This feature enhances the convenience of quick swapping, allowing for easy removal...
copy of Bambu Lab A1 Series...
  • New
stock
Hotends

copy of Bambu Lab A1 Series - Hotends Kit

P1-hotend-boq-04-mknt
€37.28
The special design of hotend heating assembly enables easy separation of the thermal and electronic components of the hotend. In addition, the magnetic block installed on the hotend heatsink enables quick and accurate fixation of the hotend to its precise mounting position. This feature enhances the convenience of quick swapping, allowing for easy removal...
copy of Bambu Lab A1 Series...
  • New
stock
Hotends

copy of Bambu Lab A1 Series - Hotends Kit

P1-hotend-boq-06-mknt
€37.28
The special design of hotend heating assembly enables easy separation of the thermal and electronic components of the hotend. In addition, the magnetic block installed on the hotend heatsink enables quick and accurate fixation of the hotend to its precise mounting position. This feature enhances the convenience of quick swapping, allowing for easy removal...
copy of Bambu Lab A1 Series...
  • New
stock
Hotends

copy of Bambu Lab A1 Series - Hotends Kit

P1-hotend-boq-02-mknt
€37.28
The special design of hotend heating assembly enables easy separation of the thermal and electronic components of the hotend. In addition, the magnetic block installed on the hotend heatsink enables quick and accurate fixation of the hotend to its precise mounting position. This feature enhances the convenience of quick swapping, allowing for easy removal...
copy of Bambu Lab A1 Series...
  • New
stock
Hotends

copy of Bambu Lab A1 Series - Hotends Kit

P1-kit-hotends-08-mknt
€57.61
The special design of hotend heating assembly enables easy separation of the thermal and electronic components of the hotend. In addition, the magnetic block installed on the hotend heatsink enables quick and accurate fixation of the hotend to its precise mounting position. This feature enhances the convenience of quick swapping, allowing for easy removal...
copy of Bambu Lab A1 Series...
  • New
stock
Hotends

copy of Bambu Lab A1 Series - Hotends Kit

P1-kit-hotends-06-mknt
€57.61
The special design of hotend heating assembly enables easy separation of the thermal and electronic components of the hotend. In addition, the magnetic block installed on the hotend heatsink enables quick and accurate fixation of the hotend to its precise mounting position. This feature enhances the convenience of quick swapping, allowing for easy removal...
copy of Bambu Lab A1 Series...
  • New
stock
Hotends

copy of Bambu Lab A1 Series - Hotends Kit

P1-kit-hotends-04-mknt
€57.61
The special design of hotend heating assembly enables easy separation of the thermal and electronic components of the hotend. In addition, the magnetic block installed on the hotend heatsink enables quick and accurate fixation of the hotend to its precise mounting position. This feature enhances the convenience of quick swapping, allowing for easy removal...
copy of Bambu Lab A1 Series...
  • New
stock
Hotends

copy of Bambu Lab A1 Series - Hotends Kit

P1-kit-hotends-02-mknt
€57.61
The special design of hotend heating assembly enables easy separation of the thermal and electronic components of the hotend. In addition, the magnetic block installed on the hotend heatsink enables quick and accurate fixation of the hotend to its precise mounting position. This feature enhances the convenience of quick swapping, allowing for easy removal...
xTool M1 Air Assist Set
  • New
stock
Asistente de Aire

xTool M1 Air Assist Set

P5010231
€195.00
 Cleaner cutting surface & smooth cutting edge 30L/min strong airflow enables deeper cutting and blowing away smoke & residue Extend the lifetime of the laser lens Super silent and vibration in operation Work with Honey Comb Panel, and get the ultimate processing results
xTool Filter Replacement...
  • New
stock
Filtros

xTool Filter Replacement Kit for xTool Smoke Purifier

P5010195
€195.00
 This Filter Replacement Kit is for xTool Smoke Purifier What's in the Box: Pre-filter *2, Middle filter *1, Main filter *1 Pre-filter: Captures visible smoke and dust. Our pre-filter is much thicker and has 2.5 times longer lifespan than others on the market Middle filter: Effectively absorbs and filters harmful particles down to 0.3µm with 99.97%...
xTool Fire Safety Set
  • New
stock
Set de seguridad contra incendios

xTool Fire Safety Set

P5010212
€169.00
Fire accidents triggered by laser has been the concern of the whole industry. xTool Fire Safety Set is the Safest Possible Way to Detect & Suppress Fire. By using 5 fire detection sensors and integrated algorithms of light, temperature, and position inside the enclosed laser, xTool Fire Safety set is sensitive to any possible dangers of...
xTool Honeycomb Material Pin
  • New
stock
Panel de abeja láser

xTool Honeycomb Material Pin

P5010276
€30.99
xTool Honeycomb Material Pin is made of strong plastic and magnets that press down on the wood for a clean and consistent cut on warped boards. The pins fit perfectly with xTool and some third-party honeycomb panels. Comes with 6 Honeycomb Material Pin for xTool Series Machine (xTool D1/ xTool D1 Pro / xTool M1). 35mm x 13.5mm x 21mm
xTool Professional...
  • New
stock
Gafas

xTool Professional Wavelength Laser Protection Goggles for 180nm-540nm

P5010162
€37.90
The safety goggles can filter out light in the wavelength range of 180nm to 540nm.Wearing safety goggles during laser processing can effectively protect your eyes.When you wear these safety goggles that keep you from looking directly at the laser beams, your eyes will stay relaxed and comfortable.Wear the goggles, and then enjoy your creation with no...
xTool S1 Honeycomb Panel
  • New
stock
Panel de abeja láser

xTool S1 Honeycomb Panel

P5010250
€205.00
S1 Partner for Clean and Easy Cutting. The honeycomb and 5mm anti-slip pads facilitate air circulation and less temperature carbonization and better smoke diffusion.
xTool S1 Smart Air Assist Set
  • New
stock
Asistente de Aire

xTool S1 Smart Air Assist Set

P5010254
€205.00
Elevate your laser engraving experience with the improved Air Assist from xTool, made for your S1. With a steady output power of 30L/min, the air assist effectively removes smoke and ensures laser energy stability. Highlights Auto Control or Precise Adjustment No power charger needed Steady Output of 30L/min Airflow
xTool S1 Riser Base
  • New
stock
Base elevadora

xTool S1 Riser Base

P5010249
€239.00
The Riser Base allows engraving on thicker materials and does so while still preventing light and smoke leaking. With the riser base workpieces can be as thick as 125mm. Highlights Largely Expanded Working Area (Height) Meets the Needs of Different Engraving Thickness Easily Adjustable Base Plate Height Rising without Light Leakage
xTool Smoke Purifier
  • New
stock
Air purifier

xTool Smoke Purifier

P5010297
€829.00
Create a silent and safe working environment with the xTool Smoke Purifier, compatible with xTool M1, D1, D1 Pro (With enclosure), Laserbox Rotary, Laserbox Pro, and P2. Highlights <55 dB 3 Stage Filtration Easy to Use
A1 mini Build Plate and...
Out-of-Stock
Hotends

A1 mini Build Plate and Hotends Kit

A1-kit-hotends-placa-smooth-mknt
€69.13
The Smooth PEI Plate offers high z-axis precision printing and a smooth and matte surface finish. The various nozzles provide flexibility in choosing the preferred print quality and print speed. You can learn more about the product details on the product pages.
View
Bambu Lab A1 Series -...
stock
Hotends

Bambu Lab A1 Series - Hotends Kit

A1-kit-hotends-mknt
€43.72
The special design of hotend heating assembly enables easy separation of the thermal and electronic components of the hotend. In addition, the magnetic block installed on the hotend heatsink enables quick and accurate fixation of the hotend to its precise mounting position. This feature enhances the convenience of quick swapping, allowing for easy removal...
Bambu Lab AMS lite -...
stock
Almacenamiento filamento 3D

Bambu Lab AMS lite - Automatic Material System

A1 Mini-mknt
€273.52
Product Features Multi-Color/Multi-Material Capability Automatic Filament Backup Improved Spool Compatibility Easy to Maintain RFID Filament Sync Compatibility: A1 Series
xTool F1 Slide Extension...
stock
Base de extensión deslizante

xTool F1 Slide Extension Standard Version

P5010253
€239.00
The xTool Slide Extension for F1 gives you 4x larger working area than with the xTool F1 itself. Highlights: 4x working area than xTool F1 itself. Still fast & precise and work with 500+ materials Manual/auto Focus and Frame/Outline Preview Come with 5 clamps for holding materials in place.
xTool P2 Honeycomb Panel
stock
Enclosures

xTool P2 Honeycomb Panel

P5010283
€229.00
The xTool Honeycomb Panel impressively minimizes flashback during cutting, ensuring a precise and efficient process. Its unique design effectively channels smoke and heat away from the cutting area, preventing any disruptions. Highlights Prevent Cutting Pieces from Falling Through and Getting Burned Easy Set-up and Batch Engraving Strong Load-Bearing...
xTool F1 Desktop Smoke...
stock
Air purifier

xTool F1 Desktop Smoke Purifier

P5010219
€415.00
The xTool smoke purifier for F1 creates a silent and safe working environment. With its 3-layer filtration including premium activated carbon and HEPA filters a 99.97% purification rate can be achieved. Highlights: 99.97% purification rate ≤ 55dB Noise Rate Compatible with xTool F1 One extra exhaust pipe and 2 spare pre-filters in the package
Product added to wishlist
Product added to compare.